Canon imageRUNNER ADVANCE C5255 Series Service Manual page 250

2
Technology > Embedded RDS > E-RDS Setup > Steps to Service Call button settings
● Steps for service call cancellation
To cancel the service call, follow the instructions as described below.
1. Touch the [Counter Check] button on the control panel to display the Check Counter
screen.
2. Touch the [Monitoring Service] button, and touch the [Service Call] button on the Monitoring
Service screen.
3. Touch the [Cancel] button, and touch the [Yes] button in the check screen.
NOTE:
E-RDS generates an alarm of service call cancellation at this timing, and sends the
alarm to UGW.
2 Technology > Embedded RDS > E-RDS Setup > Steps to Service Call button settings
4. "The request has been canceled." is displayed.
F-2-388
F-2-389
2-212
F-2-390
2-212