Canon imageRUNNER ADVANCE C5255 Series Service Manual page 164

2
Technology > MEAP > Preparation for Using SMS > Settings on the Device Side
● Key Pair and Server Certificate when Using Encrypted SSL
Communication
To use SMS via SSL connection, it is required to specify a key pair and server certificate as
the key to be used.
Since a key (default key) that can be used for encrypted SSL communication is installed as
standard on the device, advance setting of the key pair and server certificate is not required.
In order to use an encryption key other than the default key, follow the procedure "Generating
a key pair" shown below to make settings for the key pair and server certificate necessary for
encrypted SSL communication.
Note:
• MFP has a server certificate registered as standard.
• For detailed procedures of the Default Key setting, refer to [e-Manual > Security].
• As for SMS, by setting a Default Key, encrypted SSL communication is always executed
regardless of the following setting: [Settings/Registration] > [Management Settings]
(Settings/Registration) > [MEAP Settings] > [SSL Settings]: ON/OFF.
Generating a key pair
1) From a PC on the same network as the device, use a web browser to access the remote
UI's portal page. Then, select [ Settings/Registration ] from the menu on the right side of
the screen.
URL to access: http://<device's IP address>:8000/
2 Technology > MEAP > Preparation for Using SMS > Settings on the Device Side
2) Click [ Management Settings ] > [ Device Management ] > [ Certificate Settings ] > [ Key
and Certificate Settings ].
3) Click [ Generate Key... ] button.
4) Click [ Network Communication ]
F-2-164
2-126
F-2-165
F-2-166
F-2-167
2-126