Canon imageRUNNER ADVANCE C5255 Series Service Manual page 267

2
Technology > Updater > Preparation > Network Settings
Note:
• For the URL of the L-CDS server, enter the address beginning with "htts://" specified in
L-CDS. If the port number has not been specified, 443 is internally added as the port
number.
• To display the button of the local CDS, execute Settings/Registration > Management
Settings > License/Other > Register/Update Software. It is not displayed in service mode.
6. Press [OK] to set the entered items. Now the URL of the distribution server is successfully
set.
● Communication Test
This section describes how to check if the communication is normally done to the distribution
server and/or the file server.
Note:
CDS and RDS are another servers.You need the communication test of CDS by all
means even if You succeed in a communication test of the RDS.
1. Start [Service Mode] at Level 1.
2. Press [Updater] button.
2 Technology > Updater > Preparation > Network Settings
3. Press [Software Management Settings] button.
4. Press [Test Communication] button.
F-2-413
2-229
F-2-414
F-2-415
2-229