4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the DADF Pickup Unit
Caution:
When assembling the DADF unit, pass the DADF harness [1] through the harness
guide [A].
When assembling the DADF unit, wind the DADF harness [1] and reader harness [3]
around the inside of the 2 flat cables [2], and mount the connector cover [4].
[2]
4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the DADF Pickup Unit
[1]
[A]
[3]
[4]
F-4-78
Before Removing the DADF Pickup Unit
1) Remove the left cover. (Duplex models) (Refer to page 4-31)
2) Remove the DADF unit and reader unit. (Refer to page 4-40)
3) Remove the DADF unit. (Refer to page 4-42)
Removing the DADF Pickup Unit
1) Open the DADF upper cover [1].
[1]
4-44
F-4-79
4-44