Leuze Webconfig Tool; Connecting The Service Usb Interface; Installing The Required Software; System Requirements - Leuze electronic BCL500i Technical Description

Leuze webConfig tool

9 Leuze webConfig tool
With the Leuze webConfig tool, an operating-system independent, web-technology based,
graphical user interface is available for configuring barcode readers of the BCL 500
Through the use of HTTP as communication protocol and by using only standard technolo-
gies on the client side (HTML, JavaScript and AJAX), which are supported by all commonly
used, modern browsers (e.g. Mozilla Firefox beginning with Version 1.5 or Internet
Explorer beginning with Version 6.0), it is possible to operate the Leuze webConfig tool
on any internet-ready PC.
9.1

Connecting the SERVICE USB interface

The connection to the SERVICE USB interface of the BCL 500
via the PC-side USB interface using a special USB cable with 2 type A/A connectors.
Figure 9.1:
9.2

Installing the required software

9.2.1

System requirements

Operating system:
Computer:
Graphics card:
Required hard-disk capacity:
104
Connecting the SERVICE USB interface
BCL 500
Windows 2000
Windows XP (Home Edition, Professional)
Windows Vista
PC with USB interface version 1.1 or higher
min. 1024 x 768 pixels or higher resolution
approx. 10MB
i i
\ BCL 501
i series.
i \ BCL 501 i is established
Leuze electronic