Introduction; Overview - ABB CPS6000 Product Manual

1 Introduction

Overview

CPS6000 -48V Outdoor Power System is a modular power system designed for 19-inch (483mm) and
23-inch (584mm) applications where reliability, space conservation and environmental considerations
are critical. This highly dense power system occupies minimum space and its modular architecture
enables an exact fit to custom needs.
The shelf architecture is based on the widely accepted and acclaimed CPS4000 systems. AC power is
brought in on the left side of the shelf. The first slot on the left side is occupied by the controller. DC
Output is aggregated on the right side of the shelf. Rectifiers/Ringers occupy the slots available
between the controller and the DC output
19 - Inch Shelf
Controller
Power Slots
Single-Slot
Distribution Module
23 - Inch Shelf
Controller
Power Slots
Single-Slot
Distribution Module
Figure 1-1: CPS6000 System with Distribution Module
The CPS6000 currently supports -48V primary loads up to 8.2kW of N+1 redundant power in a single
19-inch shelf, and up to 10.9kW of N+1 redundant power in a 23-inch shelf with a Bulk Output Module
and 50A rectifiers.
CPS6000 systems may include up to 4 bulk-output shelves: an Initial shelf with controller, and up to
three supplemental shelves. External distribution is used with multi-shelf systems.
Ringer Chassis may be installed in Power Slots. Each Ringer Chassis supports one ringing output in
either non-redundant (simplex) or 1 + 1 redundant (duplex) operation. Ringer distribution is direct from
the Ringer Chassis.
Page 7
© Copyright 2021 ABB. All rights reserved.