Es772A Remote Distribution Module; Overview - ABB CPS6000 Product Manual

12 ES772A Remote Distribution Module

Overview

The ES772A allows the QS840A CPS6000 Controller to communicate with devices in TEPS or OEM
distribution panels. It will allow the QS840A to alarm for open load and battery protectors, read
battery current from an external shunt, and control up to two contactors. One of the contactors could
be a load-disconnect and one could be a battery disconnect type. An updated version of the ES772A will
be available shortly that will offer additional features.
Controls, LED and Connectors
Receptacle J1: User connections to external distribution module.
Receptacle J3: User connections to external distribution module.
J100/J101: User connections to the QS840A System Controller Auxiliary Port Connector (P5) and to
other devices such as the QS873A VT-Probe and the ES771A Remote Voltage Monitor Module.
Receptacle J5: User connections to external distribution module.
Mounting Hole MH1: Mounting hole to mount module in user application.
LVD2 Disc SW: Disconnect switch for external contactor 2, when wired as described in installation
section.
Page 137
© Copyright 2021 ABB. All rights reserved.
LED
LVD 1
Disconnect
Switch
Manual LVD Cont Connect
LVD 2
Disconnect
Switch
Figure 12-1: ES772A Remote Distribution Module
MH1
J1
J3
J100
J101
J5
MH2