Table of Contents
Advertisement
Size (Amps)
3
5
10
15
16
20
Some versions of the distribution module accept breakers that alarm for trip or open condition. The
Ordering codes for such breakers are provided below. These breakers can ONLY be used with specific
distribution modules
Size (Amps)
3
5
10
15
20
25
Caution - Please check the type of breaker the distribution module accepts before using the above
Ordering codes
Pluggable Strap
Size(Amps)
100A Pluggable Strap
Distribution Module GMT Fuses
The following GMT fuses have been accepted for use in dc load applications, are available for the
current Distribution Module.
Size (Amps)
0.25
0.5
1.33
2
3
5
The following shows the possible fuse loading scenario for the Single-Slot and Double-Slot
Distribution Modules. 20A fuse positions can be used only with factory wiring. When using 20A fuses,
adjacent fuse positions must be left open.
For the Single-Slot Distribution Module with 10 GMT fuses, Field installation is only rated for 10A fuses.
No more than 80A may be carried through the 10 fuse positions, or 40A through each half section. 15A
and lower rated fuses may be used in any combination and position, as long as they do not violate the
previous 80A/40A rule.
Page 26
© Copyright 2021 ABB. All rights reserved.
Ordering code
407998137
407998145
407998152
407998160
407998178
407998186
Ordering code
CC408606834
CC408606842
CC408606850
CC408606867
CC408606875
CC408606883
Ordering code
405006222
406976894
405673146
405181983
406976985
406159061
Size (Amps)
25
30
45
50
60
70
Size (Amps)
30
40
45
50
60
Ordering code
CC109106548
Size (Amps)
7.5
10
12
15
20
Ordering code
407998194
407998202
407998210
407998228
407998236
407998244
Ordering code
CC408606891
CC408606900
CC408606917
CC408606925
CC408606933
Ordering code
405725433
406159236
407845197
406473959
408555453
Advertisement
Table of Contents
