ABB CPS6000 Product Manual page 47

QS873A VT-Probe
Plug wires into the probe prior to
placing the probe into the case.
Place probe in the case and make sure
the case pin inserts into hole in the
board.
Mount or top of
power lg (as shown)
Page 47
© Copyright 2021 ABB. All rights reserved.
Top of case
Figure 5-9b: Tie Wraps for strain relief and additional support
Figure 5-9c: Connecting Thermal Probe Cable to the battery
Case loop
Cable-tie around case for
additional support
V+ Power
Cable
1
V- Power
QS873A
2
Cable
VT Probe
Mounting
Hardware
Cable-tie wires to case
loop for strain relief
3
Do Not mount beneath
power lug