Configurations; Distribution And Power Module Configurations - ABB CPS6000 Product Manual

Configurations

The 19-Inch Shelf provides four Power Slots.
The 23-Inch Shelf provides five Power Slots.
Power Slots support Rectifiers, Ringer Chassis, and Distribution Modules. Figure 2-3 shows the show
the locations of the CPS6000 components in the19-inch and 23-inch shelves with the Single-Slot
Distribution Module.
19 - Inch Shelf
Controller
Power Slots
Single-Slot
Distribution Module
23 - Inch Shelf
Controller
Power Slots
Single-Slot
Distribution Module
Figure 2-3: CPS6000 Systems with Single-Slot Distribution Module

Distribution and Power Module Configurations

The 19-inch shelf has four Power Slots, and the 23-inch shelf has five Power Slots for power modules
(Rectifiers and up to two Ringer Chassis) and distribution options (See 2- 4). With Bulk Output
Distribution only, all slots are available for power modules. The Single-Slot Distribution Module
occupies the right-most Power Slot, and the Double-Slot Distribution Module occupies the right-most
two Power Slots, leaving the remaining Power Slots available for power modules. Up to two Ringer
Chassis can be installed in the right-most remaining Power Slots.
Page 13
© Copyright 2021 ABB. All rights reserved.