Introduction; Intended Audience; Abbreviations - ABB Eagle Programming Manual

1. Introduction

EAGLE is a single phase recloser with an in-built numerical relay for taking the appropriate
decisions during system fault conditions. EAGLE provides a Web-HMI over Wi-Fi which can be
accessed from any handheld device (mobile phones, iPad or laptops). Through the Web-HMI
users can program the recloser, monitor or perform control operations.
EAGLE can be connected to CIM605 Gateway which can download/read data from EAGLE and
send to remote control center. The Gateway also allows user to access Eagle Web-HMI directly.
The Gateway supports DNP3 protocol using which user can monitor and give control
commands to EAGLE.
This document describes in detail the usage of the Web-HMI along with application and
functionality descriptions of the recloser and lists function blocks, logic diagrams (wherever
needed), setting parameters and technical data sorted per function. The document can be used
as a technical reference during the engineering phase, installation and commissioning phase,
and during normal service.

1.1. Intended Audience

This document addresses system engineers, installation and commissioning personnel who use
technical data during engineering, installation and commissioning, and in normal service. The
system engineer must have a thorough knowledge of protection systems, protection
equipment, protection functions and the configurations set in the device. The installation and
commissioning personnel must have a basic knowledge in handling electronic equipment.

1.2. Abbreviations

SI Abbreviation
1 AR
2 BI
3 CB
4 CLP
5 CT
6 DR
7 EAGLE
8 FPI
9 HLT
10 LED
11 LP
12 LRC
13 NRM
14 OC
15 SCADA
Description
Auto Reclose
Binary input
Circuit Breaker
Cold Load Pickup
Current Transformer
Disturbance Record
Single phase Recloser Device
Fault Pass Indicator
Hot Line Tag
Light Emitting Diode
Load profile
Long Range Communication cabinet
Non-Reclose Mode
Over current protection
Supervisory Control and Data Acquisition
5