Table of Contents
Advertisement
Step
Action
Insert one #4 Screw inside the left side of the Bulk Output Module, hand tight to approximately 5 in-lb.
8.
See Figure 5-2.
9.
Insert one #4 Screw on the right side of the shelf, hand tight to approximately 5 in-lb. See Figure 5-3.
Put a 3/8-inch lock washer and a flat washer on the 3/8-inch bolt. Locate the two access holes on the rear
10.
of the shelf. Attach the Distribution Module to the shelf with the washers and two bolts. Torque to 240
in-lb.
11.
Cover the two access holes with the Black Plastic Covers shown.
Distribution
Module (shown)
or Bulk Output Module
#4 Screw (901376756)
Hand Tight
( Approximately 5 in - lb )
Page 39
© Copyright 2021 ABB. All rights reserved.
#4 Screw
Hand Tight
(approximately 5 in - lb )
Figure 5-2: Bulk Output Module
3/8" Bolt (801085119)
3/8" Lock Washer (802286773)
3/8" Flat Washer (814251898)
Torque : 240 in - lb
Figure 5-3: Distribution Module
Black Plastic
Cover Bushings
Advertisement
Table of Contents
