ABB CPS6000 Product Manual page 183

Alarm /
Description
Event
Alarm asserted when
the controller can not
detect a single serially
Comm Loss
connected rectifier or
Minor
any number of thermal
probes that was
previously connected.
Controller on-board
Controller ambient temperature
Ambient measurement has
Temperatur reached the configured
e High high ambient
temperature threshold.
Controller on-board
Controller ambient temperature
Ambient measurement has
Temperatur reached the configured
e Low low ambient
temperature threshold.
Controller has power
Controller and has failed.
Fail Implemented in
hardware.
Controller determines
Defective
a "1-wire" probe t to be
Temp Probe
defective.
One or more rectifiers
Fan Fail has reported a failed
fan
An input that has been
properly configured
Fuse Major and mapped as a Fuse
Alarm Major has been
detected.
An input that has been
properly configured
Fuse Minor and mapped as a Fuse
Alarm Minor has been
detected.
Alarm asserted when
the controller detects
battery temperatures
in excess of the
High Battery
configured threshold.
Temperature
Enabled with 1-wire
temperature probes
for slope thermal
compensation.
Page 183
© Copyright 2021 ABB. All rights reserved.
Default Range /
PMJ PMN
Setting Severity
Major/
Minor Minor/
RO
35-75 °C
75°C
Major/
Minor Minor/
RO
-40-10 °C
-40°C
Major/
Minor Minor/
RO
N/A N/A
Major/
Minor Minor/
RO
Major/
Major Minor/
RO
Major/
Major Minor/
RO
Major/
Minor Minor/
RO
30-85 °C
55 °C
Major/
Minor Minor/
RO
Alarm Relays
Relay 1 Relay 2 Relay 3 Relay 4
LED LED
AUX
PMJ PMN NORM
MD
Red Yellow Green Red