Table of Contents
Advertisement
Heat Dissipation
Power Factor
Note: Maximum current is based on Bulk Output Module and 50A QS865A rectifier. System capacity will decrease with lower rated rectifiers
Power Slots Available for Rectifiers or Ringer Chassis
Shelf
19-Inch Shelf
23-Inch Shelf
Rectifiers
Nominal Output Voltage
Operating Output Voltage Ranges
Boost Voltage
Output Current
Nominal Input Voltage
Input Voltage Ranges
Input Current
Operating Frequency Range
Operating Temperature
Output Voltage Regulation
Output Noise, Ripple
Load Share Accuracy
Heat Dissipation (per rectifier, full load)
Power Factor
Selective High-Voltage Shutdown
Backup High-Voltage Shutdown
Nominal Output Voltage
Operating Output Voltage Ranges
Boost Voltage
Output Current
Nominal Input Voltage
Input Voltage Ranges
Input Current
Page 18
© Copyright 2021 ABB. All rights reserved.
Table 2-C: CPS6000 Shelf Specifications (continued)
None (Bulk Output Module)
4
5
Power Slots Available for Rectifiers or Ringer Chassis
Table 2-D: QS861A Rectifier Specifications
Table 2-E: QS852A Rectifier Specifications
212W (724 BTU) per QS862A at full load and 240 V
130W (445 BTU) per QS861A rectifier at full load and 240 V
operation;
267W (911 BTU) per QS865A rectifier at full load and 240 V
operation;
> 0.98 for loads > 50% of full load
Distribution Module
Single-Wide
3
4
48/52/54.5 V
dc
42 to 58 V
dc
48 to 58 V
dc
0 to 15A at 54.5V
100/120/200/208/240 V
ac
85 to 275 V
ac
8A at 120 V
ac
4.4A at 208 V
ac
45 to 66 Hz
-40 to +75 °C
±0.5%
250 millivolts peak to peak maximum, over the range dc to 100
MHz
1.5A maximum deviation between rectifiers
132W (450 BTU) at 120 V
ac
130W (445 BTU) at 240 V
ac
>0.99 (low-line), >0.98 (high line)
Above 58 V
dc
Above 60 V
for 1 millisecond
dc
48/52/54.5 V
dc
42 to 58 V
dc
48 to 58 V
dc
0 to 20A at 54.5V
1200/208/240 V
ac
150 to 275 V
ac
6A at 208 V
ac
operation;
ac
.
Double-Wide
2
3
(Shutdown from 135 to 150V)
operation
operation
ac
ac
Advertisement
Table of Contents
