Av Controls Panel; Av Controls Panel Features - Extron electronics SMP 300 Series User Manual

To log in to an SMP 300 Series:
1.
2.
3.
4.

AV Controls Panel

The AV Controls panel is available on every page and within all tab views. Located along
the left side of the pages, this panel makes it possible to easily control a recording, see a
thumbnail view of the recorded and output video, swap video content between windows,
select different inputs, and mute or unmute the AV output. The browser always opens with
the AV Controls panel expanded and both presenters and administrators have access.

AV Controls Panel Features

The AV Controls panel includes the following features:
Preview
This area (see
view of the output video. It is delayed about 5 seconds
compared to the recording and output stream.
The live preview stream is independent of the streaming
settings configured in the Encoding Presets pane (see
Encoding & Layout
NOTE: The preview video in the AV Controls panel
•
Open a web browser.
Enter the IP address of the SMP into the address field and navigate to that unit. The
Authentication Required (Chrome or Firefox) or Windows Security (Microsoft
Edge) login dialog box opens.
Enter the appropriate user or administrator user name and corresponding password
into the fields.
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is no password (see
on page 86 to change a password).
Click Log In or OK. The embedded web page opens.
, at right) provides a small, live stream
1
on page 81).
of the SMP uses an HTML5 player and is not
supported by Microsoft Edge or Apple Safari. To
see a preview of the current stream either:
Use a different browser or
Open a standalone, third-party video player (such
as VideoLAN opensource VLC media player) and
connect to the stream from the SMP.
Disabling the preview window — To make the
embedded web pages faster to refresh, the live
preview can be disabled. The recording and output
streams continue to be streamed when this preview
is disabled. To disable the live feed to this preview,
clear (uncheck) the Enable Preview checkbox (
above the preview window.
To display the preview again, select (check) the
Enable Preview checkbox. The confidence stream
for the preview can also be disabled using front panel
controls (see Front Panel Menu Operation
page 26).
2 2 2
1 1 1
)
2
on
Figure 31.
SMP 300 Series • Web-Based User Interface
Users and Roles
3 3 3
4 4 4
5 5 5
AV Controls Panel
58