Extron electronics SMP 300 Series User Manual page 32

PBP Upper Left <1>
PbP 25%, main window 75% PbP 25%, main window 75%
Ch. B
16:9
Ch. A
METADATA
16:9
METADATA
PBP Upper Right <2>
PbP 25%, main window 75% PiP 25%, main window 100%
Ch. B
Ch. B
16:9
16:9
Ch. A
METADATA
16:9
METADATA
PBP Mid Left <3>
PbP 25%, main window 75%
PiP 25%, main window 100%
Ch. B
16:9
Ch. A
METADATA
16:9
METADATA
Figure 10. Layout Presets
NOTE: PBP = Picture Beside Picture
PIP = Picture In Picture
4. Press NEXT (see figure 9,
5. If desired, press SWAP to reverse the screen position of the A and B input selections.
To store a custom layout configuration:
1. Select the layout from the above configurations closest to your requirements.
2. Change the window size and centering adjustments for each input to modify the layout
as needed (see Picture Control Menu
3. Press and hold LAYOUT PRESET for 3 seconds to enter the saved layout menu.
4. Use either ADJUST knob to select the desired preset location to store the new layout.
5. Press Next to save the new layout.
NOTE: In order to preserve the aspect ratios of the windows, some layouts can
have slightly different spacing at lower resolutions. It is recommended to save
custom layouts at the resolution at which they are to be recalled.
PBP Mid Right <4> Side by Side <7>
Windows horizontally centered
Ch. B
16:9 Ch. A
16:9
Ch. A
METADATA
16:9
METADATA
MORE METADATA
PIP Upper Left <5> Side by Side (1) <8>
Windows horizontally centered
MORE METADATA
Ch. A Ch. A
16:9 16:9
Fullscreen A <9>
PIP Upper Right <6>
main window 100%
Ch. B
16:9
Ch. A
16:9
on page 23) to select the layout.
H
on page 30),
SMP 300 Series • Front Panel Operations
Fullscreen B <10>
main window 100%
Ch. B Ch. B
16:9 16:9
METADATA,
CH A Center <11>
main window 75%, centered in screen
METADATA,
Ch. B Ch. A
16:9 16:9
METADATA, MORE METADATA
CH B Center <12>
main window 75%, centered in screen
Ch. A Ch. B
16:9 16:9
METADATA, MORE METADATA
24