Publish Settings - Extron electronics SMP 300 Series User Manual

Publish Settings

The Publish Settings page provides controls to specify and configure the server
destination to upload completed recordings.
Firmware v2.xx Publish Settings
The Firmware v2.xx Publish Settings page has two panels: Active Profiles and
Publishing Destination Configuration, which has three sub-pages to specify the
server destination to upload completed recordings, to configure and test protocols and
settings to enable publication (uploading), and to automatically delete internal recording
folders after successfully publishing the folders.
NOTE: The SMP 300 Series device has the basic Schedule Settings and Publish
Setting tabs while operating with firmware v2.xx (xx = latest version).
Figure 46.
Select the desired radio button for an Active Schedule Source from these options:
Active Schedule Source
No Centralized Schedules (adhoc event only)
(default)
Manually import iCalendar one time
Import iCalendar data periodically
Centralized Schedule as Microsoft server
Centralized Schedule as Opencast Server
Select the desired radio button for a publishing destination from these options:
Active Publishing Destination
No Centralized upload server (default)
Ingest into Kaltura Hosted Video Platform
Ingest into Opencast Server
FTP/SFTP/CIFS server
For additional information and details on how to configure settings for each publishing
option, see the SMP 300 Series Embedded Web Pages Help File.
Publish Settings Page
SMP 300 Series • Web-Based User Interface
Corresponding Tab
Not applicable
Manual Calendar Import
Periodic Calendar Import
Microsoft Exchange Server
Opencast Server
Corresponding Tab
Not applicable
Kaltura Ingest
Opencast Ingest
Other FTP/SFTP/CIFS
69