Extron electronics SMP 300 Series User Manual page 139

Command Function
Encoder Settings (Archive Encode and Recording) continued
RTMP Stream Status
Query primary RTMP
Status
Query backup RTMP
Status
X*
KEY: = Status
X(
= Enable/disable
X50)
= Stream selection
Auto Reconnect RTMP
Enable auto reconnect
Disable auto reconnect
View auto reconnect
X(
KEY: = Enable/disable
X50)
= Stream selection
Enable/Disable Single/Secondary Recording (Composite mode)
Single recording enable
Secondary recording
enable
Recording disable
View record status
X58@
KEY: = Recording mode
Enable/Disable Archive Recording (Dual Channel mode)
Set archive channel A
View channel A record
status
Set archive channel B
View ch B record status
X(
KEY: = Enabled/Disabled
Enable/Disable Virtual Input Recording (with firmware v3.04 or higher)
Set virtual input 1
View virtual input 1
record status
Set virtual input 2
View virtual input 2
record status
X(
= Enabled/Disabled
KEY:
SIS Command
(Host to Device)
E X50) }
S1* RTMP
Verbose mode 2/3
E X50) }
S2* RTMP
Verbose mode 2/3
0 = Offline,
0 = Disabled (default),
1 = Archive Channel A,
3 = Confidence
E X50) }
R *1RTMP
E X50) }
R *0RTMP
E X50) }
R RTMP
0 = Disabled,
1 = Archive Channel A,
3 = Confidence
E }
X1*1RCDR
E }
X1*2RCDR
E }
X1*0 RCDR
E }
X1RCDR
0 = Channel A disabled,
2 = Internal + Secondary Recording in Composite mode
E X( }
X1* RCDR
E }
X1RCDR
E X( }
X2* RCDR
E }
X2RCDR
0 = Disabled (default),
E X( }
X4* RCDR
E }
X4RCDR
E X( }
X5* RCDR
E }
X5RCDR
0 = Disabled (default),
Response
(Device to Host)
X*]
X50) X*]
RtmpS1* *
X*]
X50) X*]
RtmpS2* *
1 = Live
1 = Enabled
2 = Archive Channel B (Available for Dual Channel mode only),
X50) ]
RtmpR *1
X50) ]
RtmpR *0
X( ]
1 = Enabled (default)
2 = Archive Channel B (Available for Dual Channel mode only),
]
Rcdr X1*1
]
Rcdr X1*2
]
Rcdr X1*0
X58@ ]
1 = Single Recording in Composite mode
X(]
Rcdr X1*
X(]
X(]
Rcdr X2*
X(]
1 = Enabled
X(]
Rcdr X4*
X(]
X(]
Rcdr X5*
X(]
1 = Enabled
SMP 300 Series • Remote Communication and Control
Additional Description
View primary RTMP stream
status.
View backup RTMP stream
status.
Default is enabled.
Enable single recording (internal
or external).
Enable secondary recording
(internal or external).
Disable recording.
View status.
Set archive channel A.
View channel A record status.
Set archive channel B.
View channel B record status.
131