Playing a Pull Stream Using QuickTime Media Player
Use the following procedure to playback and view SMP 300 Series streams on the
QuickTime player program.
1.
If the stream URL is known, go to step 4. Otherwise, to obtain the stream URL, access
the web‑based user interface of the SMP 300 Series (see
starting on page 52).
NOTES:
•
•
2.
The Recording Controls page opens (see figure 106).
Figure 106.
Note the Archive URL in the Stream URL panel.
3.
4.
Run QuickTime player. From the desktop, select Start > All Programs >
QuickTime > QuickTime Player.
The QuickTime media player opens.
5.
From the File menu, select Open URL (see figure 107,
Figure 107.
If no password is set, anyone can view the stream URL. If a password is set,
you must be logged in to view the URL.
The factory configured passwords for all accounts on this device have been
set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is no password (see
Roles
on page 86 to change a password).
Recording Controls Page
1
1
QuickTime Player Menu — Open URL
Web-Based User Interface
).
1
SMP 300 Series • Reference Information
Users and
157