Extron electronics SMP 300 Series User Manual page 119

X4$ =
Audio bit rate — 80, 96, 128, 192, 256, 320
X4% =
GOP length — 1 to 300
X4^ =
Record resolution
1 = 480p
2 = 720p
3 = 1080p
4 = WCIF (512x288)
5 = XGA (1024x768)
6 = SXGA (1280x1024)
99 = Custom
X4& =
Record frame rate
1 = 30 5 = 12.5
2 = 25 6 = 12
3 = 24 7 = 10
4 = 15 8 = 5
X4* =
Output refresh rate
1 = 60 Hz (default)
2 = 50 Hz
X4( =
Aspect ratio
01 = Fill (the input automatically fills the entire output
raster; default)
02 = Follow (the input is displayed in its native
aspect ratio)
03 = Fit (the input is zoomed in to fill the entire
output raster while maintaining its aspect ratio)
X5! =
Executive mode:
0 = Off (default)
1 = Complete lockout (no front panel control)
2 = Menu lockout (menu only)
3 = Allow recording controls only
X6$ =
HDMI output
0 = Channel A full screen
1 = Channel B full screen
2 = Confidence layout
X6& = EDID user location (1, 2, and 3)
X6* =
EDID resolution (see
X6( = Port timeout in tens of seconds 1 to 65000 (zero
padded. Default: 00030 = 300 seconds)
X10) =
Default name — Combination of model name and
last three pairs of MAC address
(for example: SMP-351-07-8C-EC)
X50) =
Stream selection
1 = Archive Channel A
2 = Archive Channel B (Available for Dual Mode only)
3 = Confidence
4 = Virtual input 1 re‑stream
5 = Virtual input 2 re‑stream
X50! =
Input number 1 to 5
1 or 2 digit command, Two‑digit response
X50@ =
Output channel
1 = A (input 1 and 2)
2 = B (input 3, 4, and 5)
X50# =
Encoding mode
0 = Composite mode
1 = Dual channel mode
EDID table on page 42)
X50$ =
Input video format
1 = YUVp / HDTV (default)
2 = YUVi
3 = Composite
4 = 3G‑SDI
5 = HD‑SDI
6 = SDI
7 = Auto‑SDI (Input 5 default)
X50% =
Stream name — Up to 16 alphanumeric characters,
a hyphen (‑), or underscore (_)
X50^ =
Audio selection
40000 = Analog Input A (Left)
40001 = Analog Input A (Right)
40002 = Digital input A (Left)
40003 = Digital input A (Right)
40004 = Analog Input B (Left)
40005 = Analog Input B (Right)
40006 = Digital input B (Left)
40007 = Digital input B (Right)
60000 = Output (Left, for audio mute control only)
60001 = Output (Right, for audio mute control only)
X50& = Audio level in 0.1 dB steps —
-180 to 240 = -18.0 to +24.0 dB
X51) =
Overscan
0 = 0 % (default = HDMI inputs)
1 = 2.5 % (default: YUVp input)
2 = 5.0 % (default: YUVi and composite inputs)
X51! =
HDCP status
0 = No sink/source detected
1 = HDCP detected,
2 = Sink/source detected but no HDCP
X51@ =
HDCP notification
0 = Off (mute output to black)
1 = On (green HDCP notification‑screen, default)
X51$ = Input name, up to 16 characters —
Default = Input X where X is the input number
X52( =
Json string of recording profile parameters
(for example:
PROFILE01, "contributor":"Contributor1,
"coverage":Coverage1"...
X53) =
User/Encoder/Layout Preset number —
1 to 32 (two‑digit response — 0 padding)
X53! = Preset name — Up to 16 characters
X53@ =
Input preset number — 1 to 128
X53# =
Streaming preset — 1 to 16
(two‑digit response — 0 padding)
SMP 300 Series • Remote Communication and Control
"id":1,"name":"RECORD
{
}
111