Extron electronics SMP 300 Series User Manual page 123

Command Function
Information Requests (continued)
Query eth0 link status
Query file transfer config
Query selected input
status
Query Archive/ChA
encoder presets
Query CHB encoder
presets (Dual Channel
only)
Query Confidence
encoder presets
Query Archive/ChA
streaming presets
Query ChB streaming
presets
Query Confidence
streaming presets
Query layout preset
Storage Info
Query internal
Query front USB
Query rear USB
Query RCP USB
NOTES:
•
For all USB ports, each new <name> field signifies a new partition on that USB drive, and are separated by a comma (,).
•
For the <active> field, the device will respond with 0, 1, or 2:
Query installed FlexOS
app or apps (firmware
v3.00 or newer)
Sync Schedule
Trigger schedule sync
Unsolicited response
SIS Command
(Host to Device)
13I
38I
42I
Example:
Example:
43I
44I
45I
Example:
Example:
46I
47I
48I
Example:
Example:
49I
Example:
55I
56I
57I
58I
60I <app name>*<ver#>*<enable/disable>
<app name>*<ver#>*<enable/disable>
<app name>*<ver#>*<enable/disable>
Digital I/O*2.08.0013*0
Example:
Panopto*1.00.0002*1
E }
STRGR
Response
(Device to Host)
Current link state (up/down)* speed in MB (10/100/1000)* mode
].
(full/half)
Example: \\Network_Storage\Folder, cifs
ChA<In#>*<input name>*<input resolution>*<frame
rate>*<1/0>,ChB<In#>*<input name>*<input
resolution>*<frame rate>*<1/0>
ChA1*Input1Name*1920x1080*60*1,ChB3*Input3Name*
]
720x480*60*1
ChA*Input1Name*n/a*n/a*0,ChB4*Input4Name*
]
1920x1080*50*1
<DefaultPreset#>*<DefaultPresetName>,
<SelectedPreset#>*<SelectedPresetName>
<DefaultPreset#>*<DefaultPresetName>,
<SelectedPreset#>*<SelectedPresetName>
<DefaultPreset#>*<DefaultPresetName>,
<SelectedPreset#>*<SelectedPresetName>
]
3*720 High,1*1080p High
3*720 High,0*modified,not saved
<SelectedPreset#>*<SelectedPresetName>
<SelectedPreset#>*<SelectedPresetName>
<SelectedPreset#>*<SelectedPresetName>
]
3*RTMPYouTube
]
0*modified,not saved
<DefaultPreset#>*<DefaultPresetName>,
<SelectedPreset#>*<SelectedPresetName>
3*PBP Mid LFT,7*Side By Side
Internal*<used>*<total>*free>*<recording_time>
]
*<active>
<name>*<used>*<total>*free>*<recording_time>*
<active>,<name>*<used>*<total>*free>*
<recording_time>*<active>...
<name>*<used>*<total>*free>*<recording_time>*
<active>,<name>*<used>*<total>*free>*
<recording_time>*<active>...
<name>*<used>*<total>*free>*<recording_time>*
<active>,<name>*<used>*<total>*free>*
<recording_time>*<active>...
0 = not active, 1 = single recording active,
]
]
]]
]
]]
]
TrgrS
]
TrgrS
SMP 300 Series • Remote Communication and Control
Additional Description
].
]
]
]
]
]
]
]
]
]
]
]
]
]
2 = secondary recording active.
run state enable = 1
run state disable = 0
Sync with schedule (return error
code if scheduling is off or not
supported)
Schedule is refreshed.
115