Extron electronics SMP 300 Series User Manual page 35

EXTRON
ec.
SMP 35x FW V1.06
4
ec.
45
0
SMP 352
sec.
ec.
INITIALIZING
PRESETS
(to submenus)
EXIT MENU?
PRESS NEXT
Default Display Cycle
In 1 1024x768@60
In 3 720p@60
2 sec.
TIME REMAIN
HH:MM:SS
Figure 14. Default Display Cycle for Dual Channel Mode
Press the MENU button once to bring up the first main (top level) menu, as shown below.
Each successive MENU button press cycles to the next main menu.
NOTE: From any menu or submenu, after 30 seconds of inactivity, the SMP 300 Series
times‑out to the default display cycle.
PICTURE RECORD/STREAM
CONTROL CONFIGURATION
(to submenus)
VIEW COMM
STATUS
SETTINGS
(to submenus) (to submenus)
Figure 15. Top Level Menus
The flowchart above provides an overview of the menu system.
The top level menus are displayed one at a time, in order, on the LCD panel by pressing the
MENU front panel button.
To return to the default cycle from a top level menu or submenu, press MENU repeatedly until
EXIT MENU? shows, then press NEXT. Alternatively, the menu times out after 30 seconds of
inactivity and returns to the default cycle.
Press NEXT when a menu displays to access its submenu. Within the submenu, press MENU
to exit the submenu and return to the currently active menu or press NEXT to move to the
next submenu.
Submenu details with configuration and options for each setting are on the following pages.
A complete schematic of the menus and submenus is in the reference section (see
Panel Menu Diagrams
starting on page 160).
2
sec. CHA 5.0 MB
2 sec.
1280x720@30 fps
CHB
2 sec.
1280x720@30 fps
2
sec.
TIME RECORD
2 sec.
HH:MM:SS
INPUT
CONFIGURATION
(to submenus) (to submenus)
ADVANCED
CONFIGURATION
+
(to submenus)
Input 5
for Edit Menu
SMP 300 Series • Front Panel Operations
5.0 MB
BACKGROUND
(For Composite
RECALL
Mode Only)
(to submenus)
Front
27