Extron electronics SMP 300 Series User Manual page 19

Chapter and event marking with thumbnails — Chapters or events can be marked,
•
and JPEG image thumbnails in user defined resolutions are produced to promote
efficient searching and scanning.
• Record at 480p, 720p, 1080p, 1024x768, 1280x1024, or custom resolution —
Use standard video resolutions or computer resolutions and user-defined custom rates
based on content or viewing requirements.
• Stream at resolutions from 512x288 to 1080p/30 — High resolutions deliver
superior quality images for overflow applications and lower resolutions are more efficient
for streaming distribution and confidence viewing applications.
• HDMI, component, composite, and optional 3G SDI input — Provides
compatibility with common AV signal formats at resolutions up to 1920x1200 including
1080p/60. The SMP 3G SDI models offer an additional 3G SDI input connection.
• Easy to configure and operate from the front panel or external control system
— Ensure that presentations will be recorded and streamed, and valuable information
will be documented and repurposed.
• Define specific storage destinations for recorded data — Configure the SMP
to save recordings to specific storage directories based on the user environment or
application requirements.
Recording folder playback from SMD-series decoders — Recording folders on
•
SMP can now be mounted as network shares on SMD-series decoders for immediate
playback of recordings.
HDMI-embedded stereo audio or analog stereo input and output signal support
•
— Digital and analog audio signals are supported on the input channels and the output
channel.
SDI audio de-embedding — Audio from an SDI source can be decoded and included
•
in the audio mix along with either HDMI or analog sources.
Supports the latest SMBv2 and SMBv3 protocols for secure file sharing in
•
Windows environments.
• Record audio as separate m4a file — In addition to storing video with included audio
as m4p or m4v, the SMP can also record and store audio as a separate m4a file.
• Direct compatibility with hosted video platforms — Integrate publishing of
recorded media directly to third party platforms such as Panopto, Kaltura, and
Opencast.
• USB remote control port — Configure communication settings of the SMP processor
using a keyboard and mouse viewing the embedded webpage. Connect the optional
RCP 101 Series remote control panel for extended front panel operation and convenient
thumb drive access, or the vRCP FlexOS App to remotely control the SMP processor
on any device, using any browser.
• Virtual Inputs — The additional virtual input allows the SMP to record up to 4 inputs. It
also enables SMP to accept IP camera and other encoder inputs directly for recording
and re-streaming. Virtual Input feature, available with firmware v3.04 or higher, will
enable new applications in lecture capture and medical training where more than 2 input
sources are desired.
• LinkLicense for Enhanced Panopto Features — This annual support license brings
enhanced integration with the Panopto enterprise video platform to enable the SMP to
receive recording schedules from the Panopto video platform as well as streaming live
video using RTMP and RTMPS to Panopto. Basic ad-hoc recording and publishing to
Panopto and automating the system operation does not require a LinkLicense, but does
require installation of the complimentary FlexOS application framework.
SMP 300 Series • Introduction 11