Extron electronics SMP 300 Series User Manual page 73

Storage Information
The storage information table (see figure 41) the Stream URL panel (also available in
Management on page 95) displays the names of the available connected storage
devices, their locations (internal, USB front panel port, USB rear panel port, USB RCP port),
total capacity, and amount of used and available storage space. It also provides an estimate
of remaining recording time for each drive and indicates (with a check mark) which drive is
selected as the only or primary recording location. If the SMP is set for dual recording mode,
a second check mark symbol indicates the drive selected as the secondary recording
location.
NOTE: The capacity of the internal drive shown in the Total column depends on the
options selected for the device. The SMP 352 has 440 Gigabytes. The SMP 351 has
the options of 80 Gigabyte models and 440 Gigabyte models available for purchase.
Figure 41. Recording Controls, Storage Information Table
NOTES:
• Recordings stored on the internal drive can be automatically uploaded to a network
server (see Setting the Default Recording Media
• If internal storage space is nearly full and the SMP is set up to automatically upload
recordings to a server, the SMP uses an automatic disc cleanup feature to make
room for new recordings. As needed, the unit automatically deletes recordings
previously uploaded to a server, starting with the oldest recordings, until there is
enough free space on the disk.
For details on recording deletion, see Deleting Recordings in the
•
SMP 300 Series Embedded Web Pages Help File.
To learn how to lock a recording to prevent it from being automatically deleted, see
•
Locking and Unlocking a Recording Package Folder in the SMP 300 Series
Embedded Web Pages Help File.
on page 90).
SMP 300 Series • Web-Based User Interface
File
65