Record And Stream Configuration Menu - Extron electronics SMP 300 Series User Manual

Record and Stream Configuration Menu

This menu allows the user
to configure the archive
(recording) and confidence
encodes.
Use either Adjust knob
to change the selections.
Press Next to enter
changes and move to
the next submenu. Press
Menu to enter changes and
return to the main menu.
The flow chart on the
right shows all possible
submenus for the RECORD/
STREAM CONFIGURATION
menu.
Subsequent submenus
are hidden or displayed
depending on previous
submenu selections.
Encoder select menu
This submenu determines the purpose of the encoded stream. The subsequent encoder
configuration submenus are dependent on this setting.
Select one of the following:
Archive — Provides the highest quality stream but uses the most bandwidth and
•
resources. The settings also apply to the recordings.
• Confidence — Provides a lower quality stream, typically for confidence monitoring.
RECORD/STREAM
Menu
CONFIGURATION
NEXT
ENCODER
-OR-
<ARCHIVE>
Rotate either to
select encoder type.
NEXT
ENCODER MODE
<COMPOSITE>
Rotate either to
select Composite or Dual mode.
NEXT
RECORDING
<SINGLE>
Rotate either to
select Off, Single, or Secondary mode.
NEXT
RECORD TO 71.75 GB
<INTERNAL>
Rotate [ to select Auto, Internal, or External location.
Rotate { to select a volume on the external location.
NEXT
STREAMING
<ON>
Rotate either to
select mode.
NEXT
STREAM METHOD
<PULL>
Rotate either to select
push or pull streaming.
NEXT
STREAM PROTOCOL
<MULTI RTP/UDP>
Rotate either to select
protocol to follow stream
method.
NEXT
MULTICAST IP
XXX.XXX.XXX.XXX
Rotate [ to select octet.
Rotate { to change address.
NEXT
OUTPUT MODE
<AUDIO/VIDEO>
Rotate either to select audio
and video, or video only.
NEXT
AUDIO OUTPUT
<B ONLY>
Rotate either to select ChA, ChB or A+B
(Channel B dual mono disabled).
NEXT
RESOLUTION
<1280x720>
Rotate either to
select recording resolution.
NEXT
FRAME RATE
<30>
Rotate either to
select frame rate.
NEXT
VID BITRATE AUD
<5000> <384>
Rotate [ to change video bitrate.
Rotate { to change audio bitrate.
NEXT
SMP 300 Series • Front Panel Operations
ENCODER
<CONFIDENCE>
Rotate either to
select encoder type.
NEXT
STREAMING
<ON>
Rotate either to
select mode.
NEXT
STREAM METHOD
<PULL>
Rotate either to
select push or pull
NEXT streaming.
STREAM PROTOCOL
<UNI RTP/UDP>
Rotate either to
select protocol to follow
NEXT
stream method.
DESTINATION IP
XXX.XXX.XXX.XXX
Rotate [ to select octet.
Rotate { to change address.
NEXT
RESOLUTION
<512x288>
Rotate either to
select streaming
resolution.
NEXT
FRAME RATE
<15>
Rotate either to
select streaming
frame rate.
NEXT
VID BITRATE AUD
<350> <192>
Rotate [ to change video bitrate.
Rotate { to change audio bitrate.
NEXT
33