Command And Response Tables - Extron electronics SMP 300 Series User Manual

Command and Response Tables

Command Function
Information Requests
*
NOTE: An asterisk ( ) after the version number indicates the currently running version. Question marks (
^
loaded. A caret ( ) indicates the firmware version that should be running, but a Mode 1 reset
the default factory firmware is running. An exclamation point (
Firmware version
Firmware and build
version
Verbose version info
Bootstrap Version
Factory firmware version
Updated firmware
version
View temperature of the
unit
X1!
= Firmware version number
KEY:
X2$
= Temperature
Query part number
Query model name
Query model description
Query system memory
usage
Query serial number
Query MAC address
Query LinkLicense
Query number of
connected users
Query system processor
usage
Query system processor
idle
SIS Command
(Host to Device)
!
Q or 1Q
*Q/q
0Q
2Q
3Q
Example:
4Q
Example:
E }
20STAT
Verbose mode 2/3
Degrees in Celsius (example:
N
1I
2I
3I
99I
98I
Example:
E }
LELIC
10I
11I
12I
Response
(Device to Host)
Rear Panel Reset
) indicates corrupted firmware. These apply to 0Q-4Q.
X1!]
X1!]
]
Sum of 2Q-3Q-4Q
X1! ]
X1!
plus Web ver.‑desc‑UL date/
]
time
1.00.0000-b2325(1.81LX-SMP 351
-Sat, 01 Nov 2014 20:10 UTC)
X1!
plus Web ver.‑desc‑UL date/
]
time
1
.00.0004-b2635*(1.81LX-SMP 351
-Sun, 02 Nov 2014 00:12 UTC
X2$]
X2$]
20Stat
xx.x
C)
]
60-1324-01
]
60-1324-02
]
60-1324-11
]
60-1324-12
]
60-1634-11
]
60-1634-12
]
Example: SMP•351
Streaming•Media•Processor
#Bytes used out of #KBytes
]
Example: A13VE3R
]
00:05:A6:HH:HH:HH
Dual Recording Upgrade ,
]]
79-2547-XX
]
N
]
NN
]
NN
SMP 300 Series • Remote Communication and Control
Additional Description
?.??
) indicate that only factory firmware is
on page 19 was executed and
Firmware version to 2 decimal
places (1.00).
Firmware version to 2 decimal
places plus build number to 4
decimal places (1.12.1234).
Show bootstrap, factory‑installed,
and updated firmware version.
The bootstrap firmware is
not user replaceable, but you
may need this information for
troubleshooting.
Factory installed firmware is not
user replaceable. This firmware
is the version the SMP reverts to
]
after a mode 1 reset.
Use this command to find out
which version of firmware has
been uploaded into the SMP 300
]
)
Series.
SMP 351
SMP 351 3G‑SDI
SMP 351 400GB SSD
SMP 351 3G‑SDI/ 400GB SSD
SMP 352
SMP 352 3G‑SDI
SMP 351, SMP 351 3G‑SDI,
SMP 352, or SMP 352 3G‑SDI
]
]
Returns the serial number.
Returns one or more MAC
addresses in a colon separated
string.
If license not installed, returns
]].
If multiple license are installed,
each displays on a separate line
with ]] after the last license.
Number of users.
Returns a percentage of total.
Returns a percentage of total.
114