Reference Information; Mounting The Smp 300 Series; Tabletop Use; Furniture Mounting - Extron electronics SMP 300 Series User Manual

Reference
Information
This section provides information about:
•
•
•
•
•
•
•
Mounting the SMP 300 Series
The 1U high, full rack width, 11.5 inch deep SMP 300 Series Streaming Media Decoders
can be:
•
•
•
•
See the SMP 300 Series product page at

Tabletop Use

The SMP 300 Series includes rubber feet (not installed). For tabletop use, attach a
self‑adhesive rubber foot to each corner on the bottom of the unit.

Furniture Mounting

Furniture mount the SMP 300 Series using an optional under‑desk or through‑desk
mounting kit. Follow the instructions included with the mounting kit.
Table or Wall Mounting
Extron table or wall mounting brackets extend approximately 1/4 inch (6.4 mm) above the
top surface of the SMP 300 Series enclosure. This design allows an air space between the
mounting surface and the enclosure. Follow the instructions included with the mounting kit.

Rack Mounting

For rack mounting using the included rack mounts, do not install the rubber feet. Mount the
SMP 300 Series on a 19 inch universal or basic rack shelf.
Mounting the SMP 300 Series
Supported File Types, Drive Formats, Browsers, and Browser Plugins
DataViewer
Streaming Method Overview
Estimating Storage Requirements for a Recording
Front Panel Menu Diagrams
Front Panel Menu Diagrams (Record/Stream Configuration)
Set on a table
Mounted on a rack shelf
Mounted under a desk or tabletop
Mounted on a projector bracket
www.extron.com for compatible mounting kits.
SMP 300 Series • Reference Information 138