Front Panel Menu Diagrams (Record/Stream Configuration) - Extron electronics SMP 300 Series User Manual

Front Panel Menu Diagrams (Record/Stream Configuration)

ENCODER MODE
<DUAL>
NEXT
RECORDING RECORDING RECORDING
<OFF> <SINGLE> <OFF>
Rotate either to
select mode.
NEXT
RECORD/STREAM
Menu
CONFIGURATION
NEXT
ENCODER
<ARCHIVE>
Rotate either to
select encoder
NEXT
ENCODER MODE
<COMPOSITE>
Rotate either to
select mode. Rotate right for Dual mode.
NEXT
RECORDING
RECORDING
<SINGLE> <Internal + 2nd>
Rotate either to
select mode.
NEXT
NEXT
RECORD TO 433.71 GB
RECORD TO 71.75 GB
<INTERNAL>
INTERNAL
Display only.
Rotate [ to select auto, internal, or
external Record To location.
NEXT
NEXT
STREAMING 2ND REC TO X.XX GB
USBFRONT <VOL NAME>
<ON>
Rotate either to
Rotate either to select among
toggle streaming
multiple volumes on a drive.
on or off.
NEXT
STREAM METHOD
-OR-
<PULL>
Rotate either to
select push or pull.
NEXT
STREAM PROTOCOL STREAM PROTOCOL
-OR-
<UNI RTP/UDP> <MULTI RTP/UDP>
Rotate either to select protocol.
Press NEXT to select and move
to next submenu.
MULTICAST IP
XXX.XXX.XXX.XXX
Rotate [ to select octet.
Rotate { to change
NEXT
OUTPUT MODE
<AUDIO/VIDEO>
Rotate either to
select audio and video,
or video only. If dual mono enabled:
AUDIO OUTPUT -OR-
AUDIO OUTPUT
<B ONLY>
<B DUAL MONO>
Rotate either to
Rotate either to
select ChA, ChB or
select B dual mono or A+B dual mono.
A+B.
NEXT
RESOLUTION
<1280x720>
Rotate either to
select recording
resolution.
FRAME RATE
<30>
Rotate either to
select frame rate.
VID BITRATE AUD
<5000> <320>
Rotate [ to change video bitrate.
Rotate { to change audio bitrate.
ENCODER
<CONFIDENCE>
STREAMING
<ON>
STREAM METHOD
<PULL>
STREAM PROTOCOL
<UNI RTP/UDP>
STREAM METHOD
<PUSH>
NEXT
Rotate either to select protocol from
STREAM PROTOCOL
this list:
<UNI TS/UDP>
UNI TS/UDP MULTI TS/UDP
UNI TS/RTP MULTI TS/RTP
UNI ES/RTP MULTI ES/RTP
Press NEXT to select and move to
next submenu.
DESTINATION IP
XXX.XXX.XXX.XXX
RESOLUTION
Rotate [ to select octet. <512x288>
Rotate { to change
Rotate either to
select streaming
resolution.
NEXT
FRAME RATE
<15>
Rotate either to
select streaming
frame rate.
VID BITRATE AUD
<350>
Rotate [ to change video bitrate.
Rotate { to change audio bitrate.
Rotate either to
select encoder
Rotate either to
toggle streaming
on or off.
NEXT
STREAM METHOD
-OR-
Rotate either to
select push or pull.
NEXT
STREAM PROTOCOL STREAM PROTOCOL
-OR-
<MULTI RTP/UDP> <UNI TS/UDP>
Rotate either to select protocol.
Press NEXT to select and move
to next submenu.
MULTICAST IP DESTINATION IP
XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX
Rotate [ to select octet.
Rotate { to change
NEXT
<192>
SMP 300 Series • Reference Information
<PUSH>
NEXT
Rotate either to select protocol from
this list:
UNI TS/UDP MULTI TS/UDP
UNI TS/RTP MULTI TS/RTP
UNI ES/RTP MULTI ES/RTP
Press NEXT to select and move
to next submenu.
Rotate [ to select octet.
Rotate { to change
NEXT
161