Streaming Presets
Streaming Presets allow the user to quickly switch between various streaming options.
There are 32 streaming presets that can be saved or recalled to archive and confidence.
Streaming presets save the following parameters:
Preset name
Streaming method and protocol
Stream port
MTU
TTL
RTSP Stream Name
RTSP over HTTP port (Pull streaming only)
Audio Encoding
Which input signals are combined to form the encoded audio output vary depending on
audio channel selection and the status of the dual analog mono option, as detailed in the
following table:
Audio Encoding Channel
Selection
Channel A
Channel B
ChB Dual Mono
ChA + ChB
ChA + ChB Dual Mono
NOTES:
•
Enc = Encoded output channel
•
Ch n = Input channel n
L = Left, R = Right
•
•
Dual analog mono audio is available only on input channel B. If you enable this
feature, all audio input for channel B should be analog mono, though digital stereo
is accepted on input 4.
Set the dual analog mono audio status in Configuration > Input/Output
•
Settings > Input/Output Configuration.
Select the audio encoding channel in Configuration > Encoding & Layout >
•
Encoding Presets > Channel Selection.
STREAMING PRESETS
Multicast IP/destination (for Multicast only)
QoS (for Push streaming only)
SAP setting (for Push streaming only)
RTMP publish URL (for RTMP push only)
Destination IP/hostname
Advanced section of RTMP, such as RTMP
port, primary and backup server URL,
stream name, username, and password (for
RTMP push only)
Channel B Dual
Analog Mono Status
Disabled
Disabled
Enabled
Disabled
Enabled
SMP 300 Series • Web-Based User Interface
Channel Input and Output
Enc L = ChA L
Enc R = ChA R
Enc L = ChB L
Enc R = ChB R
Enc L = ChB L + ChB R
Enc R = ChB L + ChB R
Enc L = ChA L + ChB L
Enc R = ChA R + ChB R
Enc L = ChA L + ChB L + ChB R
Enc R = ChA R + ChB L + ChB R
83