Configuration - Extron electronics SMP 300 Series User Manual

Configuration

The eight pages within the Configuration page contain the core controls needed during
initial setup, for upgrading the unit, and restoring a configuration.
NOTE: Administrators can view and make changes to all settings. Those logged in as
Figure 49.
Using these pages, an administrator can:
•
•
•
•
•
•
•
•
•
•
•
•
users do not have access to the Configuration tab.
Configuration Tab with Subtabs
Configure basic AV input settings.
Output video test patterns for setup.
Configure output stream settings and presets.
Set up AV encoding and presets.
Select or configure layouts and layout presets.
Set passwords.
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is no password (see
on page 86 to change a password).
Set up notices and alarms.
Select preview window settings.
Configure digital I/O ports.
Configure basic communication, identity, time, data storage, and recording location
settings.
Upgrade the unit by updating firmware or installing an
page 3).
Save configurations or restore a configuration from a saved file.
Extron LinkLicense
SMP 300 Series • Web-Based User Interface
Users and Roles
(see
72