Extron electronics SMP 300 Series User Manual page 137

Command Function
Picture Adjustments
Color (NTSC and PAL inputs only)
Specify a value
Increment value
Decrement value
View
Tint (NTSC input only)
Specify a value
Increment value
Decrement value
View
X50@
KEY: = Output channel
X60*
= Picture adjust
Contrast
Specify a value
Increment value
Decrement value
View
Brightness
Specify a value
Increment value
Decrement value
View
X50@
KEY: = Output channel
X60*
= Picture adjust
Horizontal Centering (for Composite mode only)
Specify a value
Increment value
Decrement value
View
X50@
KEY: = Output channel
X60(
= Horizontal centering
Horizontal Size (for Composite mode only)
Specify a value
Increment value
Decrement value
View
:
Horizontal centering and horizontal size values are adjusted in multiples of 8. If a value is entered that is not a multiple of 8, the closest
NOTE
acceptable value is applied and returned.
X50@
KEY: = Output channel
X61@
= Horizontal size
SIS Command
(Host to Device)
E X50@ X60* }
* COLR
E X50@ }
+ COLR
E X50@ }
− COLR
E X50@ }
COLR
E X50@ X60* }
* TINT
E X50@ }
+ TINT
E X50@ }
− TINT
E X50@ }
TINT
01 = A, 02 = B
000 to 127, default: 064 (3‑digit response)
E X50@ X60* }
* CONT
E X50@ }
+ CONT
E X50@ }
− CONT
E X50@ }
CONT
E X50@ X60* }
* BRIT
E X50@ }
+ BRIT
E X50@ }
− BRIT
E X50@ }
BRIT
01 = A, 02 = B
000 to 127, default: 064 (3‑digit response)
E X50@ X60( }
1* * HCTR
E X50@ }
1* + HCTR
E X50@ }
1* − HCTR
E X50@ }
1* HCTR
01 = A, 02 = B
The value corresponds to the horizontal position of the left edge of the window. The range varies,
so the window never goes completely off‑screen (5‑digit response).
E X50@ X61@ }
1* * HSIZ
E X50@ }
1* + HSIZ
E X50@ }
1* − HSIZ
E X50@ }
1* HSIZ
01 = A, 02 = B
00120 to 04096 (5‑digit response).
Response
(Device to Host)
X50@ X60*]
Colr *
X50@ X60* ]
Colr *
X50@ X60* ]
Colr *
X60* ]
X50@ X60* ]
Tint *
X50@ X60* ]
Tint *
X50@ X60* ]
Tint *
X60* ]
X50@ X60* ]
Cont *
X50@ X60* ]
Cont *
X50@ X60* ]
Cont *
X60* ]
X50@ X60* ]
Brit *
X50@ X60* ]
Brit *
X50@ X60*]
Brit *
X60* ]
X50@ X60( ]
Hctr *
X50@ X60( ]
Hctr *
X50@ X60( ]
Hctr *
X60( ]
X50@ X61@]
Hsiz *
X50@ X61@ ]
Hsiz *
X50@ X61@ ]
Hsiz *
X61@ ]
SMP 300 Series • Remote Communication and Control
Additional Description
X60*
Sets color level to .
Increments color level.
Decrements color level.
View current setting.
X60*
Sets tint level to .
Increments tint level.
Decrements tint level.
View current setting.
X60*
Sets contrast level to .
Increments contrast level.
Decrements contrast level.
View current setting.
X60*
Sets brightness level .
Increments brightness level.
Decrements brightness level.
View current setting.
X60(
Set horizontal centering to
Shift window right.
Shift window left.
View current setting.
X61@
Set horizontal size to .
Increase width of the window.
Decrease width of the window.
View current setting.
.
129