Picture Control Menu - Extron electronics SMP 300 Series User Manual

To save a user preset from the front panel:
From the Picture Control menu, configure the selected input as desired (see
1.
Configuration Menu
2. Press MENU to cycle through the main menus to the Presets menu.
Press NEXT to cycle to the User Save submenu.
3.
4. Rotate the left (
NOTE: Only the selected front panel channel A and the selected channel B inputs
are available.
5. Use the right (
6. Press NEXT to save the new preset values.
Each input has sixteen user preset locations available. A configuration can be saved to any
preset number using this menu, the embedded web pages, or via SIS. Select N/A and press
NEXT to exit without saving settings.
To recall a user preset from the front panel:
Press MENU to cycle through the main menus to the Presets menu.
1.
Press NEXT to cycle to the User Recall submenu.
2.
3. Rotate the left (
NOTE: Only the selected front panel channel A and the selected channel B inputs
are available.
4. Use the left (
5. Press NEXT to select the new preset for the input.
Each input has 16 user presets recalled using this menu, the web pages, or via SIS. Select
N/A and press NEXT to exit without applying the user preset settings.

Picture Control Menu

The Picture Control menu includes all picture
settings such as color, tint, brightness, and contrast. In
composite mode, it allows the user to adjust horizontal
and vertical window positioning along with horizontal
and vertical window size for the selected input (see
Layout Presets (For Composite Mode Only)
page 23).
From the Picture Control menu, press NEXT to
move to the desired submenu.
In full screen mode, only channel A or only channel B
is displayed. If both channels are active, use the
Channel Select submenu and either adjustment
control to select between channel A and B. The
submenu displays the status of the selected window.
Within the submenu, use the ADJUST knobs to select
and change values as required.
Press MENU to exit the submenu.
on page 39).
[
) ADJUST knob to select the input.
{
) ADJUST knob to select one of the 16 user presets.
[
) ADJUST knob to select the input.
{
) ADJUST knob to select one of the sixteen user presets.
PRESETS
ENCODER RECALL
<N/A>
Rotate either to
select a preset.
Press
selected preset.
Press
ENCODER SAVE
<N/A>
Rotate either to select a
preset to save current
settings to.
Press
the new preset.
Press
PICTURE
CONTROL
on
CHANNEL SELECT
<A> <ON>
to recall the
to continue.
H POSITION [A] V
<+0000> <+0000>
to save the
to continue.
SMP 300 Series • Front Panel Operations
Input
Rotate to select a channel.
Rotate to turn the channel
on or off.
Rotate to adjust Horizontal
Position.
Rotate to adjust Vertical
Position.
30