Extron electronics SMP 300 Series User Manual page 138

Command Function
Picture Adjustments continued
Vertical Centering (for Composite mode only)
Specify a value
Increment value
Decrement value
View
X50@
KEY: = Output channel
X61!
= Vertical centering
Vertical Size (for Composite mode only)
Specify a value
Increment value
Decrement value
View
:
NOTE Vertical centering and vertical size values are adjusted in multiples of 2. If a value is entered that is not a multiple of 2, the closest acceptable
value is applied and returned.
X50@
KEY: = Output channel
X61#
= Vertical size
Encoder Settings (Archive Encode and Recording)
Stream Enable/Disable
Stream enable
View stream status
X(
KEY: = Enable/disable
X50)
= Stream selection
RTMP (primary) Destination URL/Stream Key
Set RTMP URL
View RTMP URL
RTMP (backup) Destination URL/Stream Key
Set RTMP URL
View RTMP URL
X50)
KEY: = Stream selection
X56^
= RTMP URL (string)
RTMP Stream Enable/Disable
Enable RTMP push
stream
View RTMP push
stream
X(
KEY: = Enable/disable
X50)
= Stream selection
SIS Command
(Host to Device)
E X50@ X61! }
1* * VCTR
E X50@ }
1* + VCTR
E X50@ }
1* − VCTR
E X50@ }
1* VCTR
01 = A, 02 = B
The value corresponds to the vertical position of the top edge of the window. The range varies, so
the window never goes completely off‑screen (5‑digit response).
E X50@ X61# }
1* * VSIZ
E X50@ }
1* + VSIZ
E X50@ }
1* − VSIZ
E X50@ }
1* VSIZ
01 = A, 02 = B
00064 to 04096 (5‑digit response).
E X50) X( }
* STRC
E X50) }
STRC
0 = Disabled (default),
1 = Archive Channel A,
3 = Confidence
E X50) X56^ }
U1* * RTMP
E X50) }
U1* RTMP
E X50) X56^ }
U2* * RTMP
E X50) }
U2* RTMP
1 = Archive Channel A,
3 = Confidence
E X50) X( }
E * RTMP
E X50) }
E RTMP
0 = Disabled (default),
1 = Archive Channel A,
3 = Confidence
Response
(Device to Host)
X50@ X61! ]
Vctr *
X50@ X61! ]
Vctr *
X50@ X61! ]
Vctr *
X61! ]
X50@ X61# ]
Vsiz *
X50@ X61#]
Vsiz *
X50@ X61# ]
Vsiz *
X61# ]
X50) X(]
Strc *
X(]
1 = Enabled
2 = Archive Channel B (Available for Dual Channel mode only),
X50) X56^]
RtmpU1* *
X56^]
X50) X56^]
RtmpU2* *
X56^]
2 = Archive Channel B (Available for Dual Channel mode only),
X50) X(]
RtmpE *
X(]
1 = Enabled
2 = Archive Channel B (Available for Dual Channel mode only),
SMP 300 Series • Remote Communication and Control
Additional Description
X61!
Set vertical centering .
Shift window down.
Shift window up.
View current setting.
X61#
Set vertical size (height) to
Increase height of the window.
Decrease height of the window.
View current setting.
Enable or disable each stream.
Enter primary publish URL of
X50)
.
View primary publish URL of
X50)
.
Enter backup publish URL of
X50)
.
View backup publish URL of
X50)
.
Enable or disable RTMP push
X50)
stream .
View status of RTMP push
X50)
stream .
.
130