Extron electronics SMP 300 Series User Manual page 126

Command Function
SNMP (Simple Network Management Protocol)
SNMP Unit Contact
Set unit contact
Set unit contact to
default
View unit contact
X62!
KEY: = SNMP contact name text, up to 64 alphanumeric characters, hyphens, underscores and period
SNMP Unit Location
Set unit location
Set unit location to
default
View unit location
X62@
= SNMP location, up to 64 alphanumeric characters, hyphens, underscores and period (default = Not Specified).
KEY:
SNMP Community Strings
Set public community
string
Set public community
string to default
View public community
string
NOTE: Community strings are referred to as passwords in the web‑based user interface.
X62#
= SNMP public community string, up to 64 alphanumeric characters, hyphens, underscores and period (default = public).
KEY:
SNMP Access Enable
Enable SNMP access
Disable SNMP access
View SNMP state
X(
KEY: = Enable/disable
SIS Command
(Host to Device)
E X62! }
C SNMP
E }
•
C SNMP
E }
CSNMP
E X62@ }
L SNMP
E }
•
L SNMP
E }
LSNMP
E X62# }
P SNMP
E }
P•SNMP
E }
PSNMP
E }
E1SNMP
E }
E0SNMP
E }
ESNMP
0 = Off or disable (default),
Response
(Device to Host)
X62!]
SnmpC*
]
SnmpC*Not•Specified
X62!]
X62@]
Snmp L*
]
SnmpL*Not•Specified
X62@]
X62#]
SnmpP*
]
SnmpP*public
X62#]
]
SnmpE*1
]
SnmpE*0
X( ]
1 = On or enable
SMP 300 Series • Remote Communication and Control
Additional Description
X62!
Sets the unit contact to .
Sets the unit contact to the
default setting.
View the unit contact.
X62@
Sets the unit location to .
Sets the unit location to the
default setting.
View the unit location.
Sets public community string
X62#
to .
Sets community string to the
default.
View the public community
string.
Enable SNMP access.
Disable SNMP access.
View the SNMP access setting.
118