Extron electronics SMP 300 Series User Manual page 46

Audio Output
The SMP 351 without LinkLicense allows the user to set the AUDIO OUTPUT to either
A ONLY, B ONLY, or A+B.
The SMP 351 with LinkLicense and the SMP 352 allow users to set the AUDIO OUTPUT to
either channels A+B DUAL MONO or B DUAL MONO when Dual Mono for channel B is enabled.
RECORD/STREAM
MENU
CONFIGURATION
NEXT
OUTPUT MODE
<AUDIO/VIDEO>
Rotate either to select audio
and video, or video only.
NEXT
AUDIO OUTPUT
<B ONLY>
Rotate either to
select ChA, ChB or A+B.
NEXT
Figure 22. Audio Output Submenu
Resolution
Archive and confidence encoders have independent resolution settings.
The selections are:
Custom
•
512x288
•
• 848x480
• 1024x768
There are three types of encoders ‑ Archive Channel A, Archive Channel B, and Confidence.
Output Rate
1
848x480
2
1280x720
3
1920x1080
4
1024x768
5
1280x1024
6
512x288
Recording resolution defaults to 1280x720.
NOTES:
• If the archive and confidence aspect ratios do not match, the source material can
appear stretched on the confidence stream.
• A custom rate is defined with the web‑based UI.
For composite mode, the confidence encode cannot have a higher resolution than
•
the archive encode.
AUDIO OUTPUT
-OR-
<B DUAL MONO>
Rotate either to
select B dual mono or A+B dual mono.
NEXT
1280x720 (default)
•
1280x1024
•
• 1920x1080
Aspect Format Name
16:9 480p
16:9 720p
16:9 1080p
4:3 XGA
5:4 SXGA
16:9 WCIF
SMP 300 Series • Front Panel Operations
Max FPS
30
30
30
30
30
30
38