System Resets - Extron electronics SMP 300 Series User Manual

System Resets

The System Resets page within Troubleshooting contains options to initiate a unit
reboot, delete all stored content and format the internal storage, or perform one of five
different types of reset. Some of the reset options offered here can also be performed using
SIS commands or the front panel menu.
To open this page, click the Troubleshooting tab at the top of the embedded web pages
and then click the System Resets tab on the second tier of tabs (see figure 88).
Figure 88.
The System Resets page opens to the Reset panel (see figure 89).
Figure 89.
Each option within this page includes a description of its function. To perform a reboot,
reset, or content deletion (storage reformatting), click the button for the desired option.
When a reset or reboot is performed, the unit reboots and loses its network connection.
NOTES:
After a reset or reboot, it may take a few minutes for the SMP to restart and
•
connect to the network. Refresh the browser window to reconnect to the unit.
• When you select Reset IP Networking Settings or Factory Reset, all IP
addresses and network settings are reset to factory defaults. You must connect
again using the default addresses.
• The factory configured passwords for all accounts on this device have been set to
the device serial number. In the event of a complete system reset, the passwords
convert to the default, which is no password (see
to change a password).
For information about resets, see the SMP 300 Series Embedded Web Pages Help File.
Troubleshooting Tab, System Resets Sub-tab
System Resets Page
SMP 300 Series • Web-Based User Interface
Users and Roles on page 86
102