Extron electronics SMP 300 Series User Manual page 158

Push Stream and Pull Stream Playback URLs
To verify a running stream, use the templates below to place the stream into the VLC "Open
Network Stream" dialog (see step 5 of
on page 153). Substitute the SMP IP address for <SMP35x_IP>. Substitute the destination
IP address and port number for <DESTINATION_IP>:DESTINATION_PORT.
Pull Stream URLs
PULL Streaming:
RTSP Unicast
(Archive Channel A)
RTSP Unicast (Archive Channel B)
RTSP Unicast (Confidence)
RTSP Multicast
(Archive Channel A)
RTSP Multicast
(Archive Channel B)
RTSP Multicast (Confidence)
Push Stream URLs
PUSH Streaming:
Unicast (Destination IP must be set to the location where the stream is played)
TS/UDP
TS/RTP
ES/RTP (Archive Channel A
ES/RTP (Archive Channel B)
ES/RTP (confidence)
Multicast (Destination IP must be multicast IP address)
TS/UDP
TS/RTP
ES/RTP (Archive Channel A)
ES/RTP (Archive Channel B)
ES/RTP (confidence)
Playing a Pull Stream Using VLC Media Player
URL
rtsp://<SMP35x_IP>/<stream name 1>
rtsp://<SMP35x_IP>/<stream name 2>
NOTE: This stream is available only on units that are set for dual
encoding mode.
rtsp://<SMP35x_IP>/<stream name 3>
rtsp://<SMP35x_IP>/<stream name 1>/multicast
or
HTTP://<SMP35x_IP>/live/pull/multicast1.sdp
rtsp://<SMP35x_IP>/stream name 2/multicast
or
HTTP://<SMP35x_IP>/live/pull/multicast2.sdp
NOTE: This stream is available only on units that are set for dual
encoding mode.
rtsp://<SMP35x_IP>/<stream name 3>/multicast
or
HTTP://<SMP35x_IP>/live/pull/multicast3.sdp
UDP://@:DESTINATION_PORT
RTP://@:DESTINATION_PORT
HTTP://<SMP35x_IP>/live/push/s1.sdp
HTTP://<SMP35x_IP>/live/push/s2.sdp
NOTE: This stream is available only on units that are set for dual
encoding mode.
HTTP://<SMP352_IP>/live/push/s3.sdp
UDP://@<DESTINATION_IP>:DESTINATION_PORT
RTP://@<DESTINATION_IP>:DESTINATION_PORT
HTTP://<SMP35x_IP>/live/push/s1.sdp
HTTP://<SMP35x_IP>/live/push/s2.sdp
NOTE: This stream is available only on units that are set for
dual encoding mode.
HTTP://<SMP35x_IP>/live/push/s3.sdp
SMP 300 Series • Reference Information 150