Alarms
The Alarms tab within Troubleshooting displays a list of alerts for events as
determined in Configuration > Alarms and Traps > Alarm Message List. Alarm list
entries are read-only. The alarm list can be sorted, filtered, searched, or exported to a
comma-separated values (CSV) file.
To open this page, click the Troubleshooting tab at the top of the SMP 300 Series
embedded web pages, then click the Alarms tab on the second tier of tabs (see figure 84).
Figure 84.
The Alarms page opens, showing filtering controls and the alarm history list (see figure 85).
Figure 85.
•
Active, unresolved alarms are displayed as red text.
•
To clear or remove an alarm, select the row it is listed in and click Clear Selected
Alarm(s).
To mute an alarm, so that it does not appear in the alarm list again the next time it is
•
triggered, select the checkbox for that alarm in the Muted column.
For further information about the Alarms page, see the SMP 300 Series Embedded Web
Pages Help File.
Troubleshooting, Alarms Sub-tab
Alarms Page, Alarm History Panel
SMP 300 Series • Web-Based User Interface
100