Extron electronics SMP 300 Series User Manual page 124

Command Function
Remove Schedule
Remove scheduled
recording events
Unsolicited response
Clear Alarms
Clear active alarms
View active alarms
Name Unit
Set unit name
Set unit name to default
View unit name
View Telnet connections
Set verbose mode
View verbose mode
NOTE: If tagged responses is enabled, all read commands return the data, the same as setting the value does.
X1@
= Unit name
KEY:
X2#
= Verbose mode
X10)
= Default name
System Commands
Backup/Restore
Save configuration
Restore configuration
X1)
KEY: = Configuration type
Resets
Reboot system
Restart the network
Reset flash
System reset (factory
defaults)
Reset all device settings
and delete recording files
NOTE: This reset excludes IP settings such as IP address, subnet mask, gateway IP address, unit name, DHCP setting and port mapping (Telnet/
web/direct access) in order to preserve communication with the device.
Absolute reset
NOTE: The factory configured passwords for all accounts on this device have been set to the device serial number. In the event of a complete
system reset, the passwords convert to the default, which is no password (see
SIS Command
(Host to Device)
E }
XTRGR
E }
CALRM
39I
If no active alarms
E X1@ }
CN
E }
• CN
E }
CN
E }
CC
Verbose mode 2/3
E X2# }
CV
E }
CV
Unit name is a text string of up to 63 characters from the alphabet (A‑Z), digits (0‑9),
and the minus sign/hyphen (‑). The first character must be an alpha character. The last
character must not be a minus.
0 = Clear/none (default for Telnet connections)
1 = Verbose mode (default for USB and RS‑232 host control)
2 = Tagged responses for queries
3 = Verbose mode and tagged responses for queries (Example: command: E CV } Response: Vrb3 ] )
Combination of model name and last three pairs of MAC address (Example:
E X1) }
1* XF
E X1) }
0* XF
0 = IP config (ip.cfg),
E }
1BOOT
E }
2BOOT
E }
ZFFF
E }
ZXXX
E }
ZY
E }
ZQQQ
Response
(Device to Host)
]
TrgrX
]
TrgrX
]
Alrm C
[name:alarm_name],[level:alarm_level]...]
]
None active
X1@ ]
Ipn
X10) ]
Ipn
X1@ ]
]
N
]
Icc N
X2#]
Vrb
X2#]
X1) ]
Cfg1*
X1) ]
Cfg0*
2 = Box specific parameters (box.cfg)
]
Boot1
]
Boot2
]
Zpf
]
Zpx
]
Zpy
]
Zpq
Users and Roles
SMP 300 Series • Remote Communication and Control
Additional Description
All future recording events are
removed from the unit.
Schedule is refreshed.
Clear all active alarms.
]
N = Number of active IP
connections.
SMP-351-07-8C-EC
Save configuration to file
location (/nortxe‑backup).
Load configuration from file
location (/nortxe‑backup).
Complete system reboot.
Reset flash memory
(excludes recording files).
Resets device to default and
deletes recorded files.
Reset to default except IP
address, delete all user and
recorded files
Same as System Reset, plus
returns the IP address and
subnet mask to defaults.
on page 86 to change a password).
)
116