Status Menu; Exit Menu - Extron electronics SMP 300 Series User Manual

Status Menu

The STATUS menu contains read‑only
submenus that show the current unit status
including active alarms, recording file names,
free space and total internal and external
drive capacity, and bit rates for archive and
confidence streams.
• ALARM STATUS — Scroll through the active
alarms. If no alarms are present, it shows
None.
• ARCHIVE — Displays filenames currently
being written to or the last file created.
If the filename is longer than sixteen
characters, the filename scrolls. It shows
N/A if no new or current recordings are
present.
NOTE: A non‑ASCII character in a
filename is displayed as a white block.
DRIVE SPACE — Indicates the free and total
•
space on the internal hard drive and the
selected USB drive. The capacity is shown
in three digits with two decimals in either
MB or GB.
• SELECTED VOLUME NAME — Displays the
size and free space on a connected USB
drive.
• OUTPUT STREAM — Displays the video bit rate and protocol of the output stream.
Press NEXT to return to the STATUS menu.

Exit Menu

From this submenu, press MENU to return to the PRESETS menu cycle, or press NEXT to exit
the menu and return to the default cycle.
MENU MENU
STATUS
NEXT
ALARM STATUS
[NONE, HDCP, VIDEO...]
NEXT
ARCHIVE
[...FILENAME...]
NEXT
DRIVE SPACE INT
[FREE/TOTAL][GB]
NEXT
SELECTED USBFRONT
[FREE/TOTAL] [GB]
NEXT
SELECTED VOLNAME
[FREE/TOTAL][GB]
NEXT
[ARCH] BR 5000 kbps CHA BR 5000 kpbs
MULTI RTP/UDP MULTI TS/RTP
NEXT
CHA BR 5000 kpbs CONF BR 350 kbps
MULTI RTP/UDP UNI RTP/UDP
NEXT
SMP 300 Series • Front Panel Operations
EXIT MENU?
PRESS NEXT
(Could say USBREAR if
selected in web pages)
48