Recording Controls
The Recording Controls page displays information about the active inputs and the output
signal, the presentation event currently in progress, and a list of upcoming presentations.
Information on this page updates every few seconds. Contents of the page are read-only
and are displayed for all users.
This page contains five panels and AV Controls (see figure 40):
1
2
3
4
5
6
NOTE: In figure 40, the home page for a standard SMP 300 Series device is shown.
System Name:
SMP-351-TechP21
Location:
SMP-351-TechP21
6 6
6
Figure 40.
NOTE: For information on the AV Controls (see
Stream URL — The URL for the unicast and multicast streams currently in progress.
Storage Information — The location or locations and size of the stored file or files.
System Inputs and Outputs — The input and output signal parameters.
Current Event — The presentation currently in progress.
Upcoming Events — A list of upcoming scheduled events for the day.
AV Controls — Start an ad hoc recording or control a recording in progress (see
an Ad Hoc Recording
on page 61 for details).
If the Horizontal Video Mirroring LinkLicense is purchased, there will be an additional
Mirroring LinkLicense tab and Horizontal Video Mirroring Status section
displaying the status of the horizontal mirroring of each input.
1
1 1
2
2 2
3
3 3
AV Controls, Recording Controls Page
and Recording Controls panels, aside from a basic description of the Storage
Information table, see the SMP 300 Series Embedded Web Pages Help File.
4
4 4
5
5 5
AV Controls Panel
SMP 300 Series • Web-Based User Interface
Start
on page 58)
64