Presets Menu - Extron electronics SMP 300 Series User Manual

Presets Menu

The presets menu allows the user to save or recall encoder and user presets.
From the default menu, press MENU to cycle to the Presets menu.
•
• Press NEXT to enter the submenus.
Press NEXT to advance to the relevant submenu: Recall or Save.
•
• Within the submenu, use the ADJUST controls to select the preset, then press NEXT to
recall or save the selection.
• Press MENU to exit the submenu.
PRESETS
ARCHIVE ENCODER
RECALL <N/A>
ARCHIVE ENCODER
SAVE <N/A>
IN<1> USER RECALL
<N/A>
IN<1> USER SAVE
<N/A>
Figure 16.
Encoder presets
Encoder presets allow users to quickly switch between various encoder profiles for different
resolution and bit rates. There are 32 encoder presets for different streaming and recording
applications. Presets 33 through 42 are factory default presets to support Panopto quality
settings.
Encoder presets save the following parameters:
Video Resolution
Video Bit Rate
Frame Rate
Bit Rate Control
MENU
NEXT
NEXT
Rotate either to
select a preset to recall.
NEXT
Rotate either to select
a preset # to save
current settings to.
NEXT
Rotate [ to select an
input.
Rotate { to select a preset.
NEXT
Rotate [ to select an
input.
Rotate { to select a preset.
NEXT
Presets Menu in
Composite Mode
ENCODER PRESETS
Profile Type
Profile Level
Audio Bit Rate
Audio Delay
MENU
PRESETS
NEXT
CHA ARCHIVE ENCODER
RECALL <N/A>
Rotate horizontal knob to select
encoder. Rotate vertical knob to
select a preset to recall.
NEXT
CHA ARCHIVE ENCODER
SAVE <N/A>
Rotate horizontal knob to select
encoder. Rotate vertical knob to
select a preset to recall.
NEXT
IN<1> USER RECALL
<N/A>
Rotate [ to select an
input.
Rotate { to select a preset.
NEXT
IN<1> USER SAVE
<N/A>
Rotate [ to select an
input.
Rotate { to select a preset.
NEXT
Figure 17. Presets Menu in Dual
Channel Mode
Record Mode
GOP Length
Preset Name
IDR Interval
SMP 300 Series • Front Panel Operations 28