Call Forwarding To Abbreviated Dial - NEC Xen Topaz Features And Specifications Manual

NEC Business Solutions Ltd

Call Forwarding to Abbreviated Dial

• Description
Call Forwarding to Abbreviated Dial allows an extension user to forward their calls to an
off-site location. By enabling Call Forwarding to abbreviated dial, the user can stay in
touch by having the system forward their calls while they are away from the office. The
forwarding destination can be any phone number the user enters, such as a car phone,
home office, hotel or meeting room. Off- Premise Call Forwarding will route the off-site
phone number over the trunk route set for the abbreviated dial bin.
Off-Premise Call Forwarding reroutes the following types of incoming calls:
Call Forwarding does not reroute Call Coverage keys, Multiple Directory Number keys,
or Ring Group calls (i.e., trunk ringing according to Ring Group assignments made in
Programs 22-04 and 22-05).
* Off-Premise Call Forwarding can reroute an incoming trunk call only if the outgoing
trunk selected has disconnect supervision enabled (see Programming above).
Off-Premise Call Forward for Doorphones
Off-Premise Call Forwarding allows Doorphone callers to be transferred automatically
to the pre-programmed external party. The destination telephone number is stored in
the Common Abbreviated Dial area. This feature may be used in case a co-worker is
out of the office. All incoming calls for their extension will be automatically transferred to
their external number (example: cell phone). Off-Premise Call Forward for Doorphones
can be transferred to the external party through ISDN lines only.
Conditions
Default Setting
Disabled.
• Related Features
Chapter 4 - 80
•
Ringing intercom calls from co-worker's extensions
•
Calls routed from the VRS or Voice Mail *
•
Direct Inward Lines *
•
DISA, DID and DDI calls to the forwarded extension *
•
Transferred calls *
A. Call Forwarding Off-Premise requires ISDN, loop start trunks with disconnect
supervision.
B. The system does not allow the chaining of Call Forwards. For example, extension
216 forwards to 218, and 218 in turn forwards to 220. Calls to 216 route to 218.
Calls to 218 route to 220. The system does allow a single chain, if the second
extension in the chain is forwarded off-premise (848 + 1 + 813 + bin).
C. Call Forwarding an extension in a Department Group will prevent that extension
from receiving Department Pilot Calls.
D. If a Programmable Function key is not defined for Call Forwarding (10 - 17), the
DND key flashes to indicate that the extension is call forwarded.
• Call Forwarding, Fixed
Fixed Call Forwarding can automatically forward an extensions calls to an outside
number.
XEN Topaz
Features