NEC Xen Topaz Features And Specifications Manual page 71

XEN Topaz
• Operation
To place a call using ARS:
Features and Specifications Manual
Set up other options for outgoing calls (e.g., unassign line keys, adjust gains,
ARS access key, loop keys, etc.).
• Least Cost Routing (LCR)
LCR is applied after trunk routing has been determined and is used to modify the
dialled digits which will be sent to line.
• Toll Restriction
Toll Restriction overrides ARS.
• Trunk Group Routing
A system with Automatic Route Selection cannot also have Trunk Group Routing.
• Trunk Queuing/Camp On
With ARS installed, Trunk Queuing automatically queues for the least costly
route. The system automatically redials the queued call when the extension user
lifts the handset.
1. At keyset, press the SPK key.
- OR -
At single line set, lift handset.
You will hear normal Intercom dial tone.
1. Dial 0
You will hear a second "stutter" dial tone.
Dial outside number.
If you hear another "stutter" dial tone, you must enter your extension's ARS Authorisation Code.
NEC Business Solutions Ltd
Chapter 4 - 63