NEC Xen Topaz Features And Specifications Manual page 76

NEC Business Solutions Ltd
Chapter 4 - 68
Use this option to set up Item 02 for single digit Barge In. For example,
you can assign Item 02 to use digit 5 for Barge In. This would allow you
to program a function key with an extension number plus the Barge In
code (i.e., 205 5). This allows one-touch access to the Barge In feature
for extension 205. If you undefine a service code, be careful when you
change this item that you don't inadvertently disable any essential Dial-
ling function (such as Voice Mail or Message Waiting).
15-07-01: Programming Function Keys
Assign a function key for Barge In (code 34).
20-06-01: Class of Service for Extensions
Assign a Class of Service (1-15) to an extension.
20-13-10: Class of Service Options (Supplementary Service) - Barge In Mode
In an extension's Class of Service, enable the Barge In Speech Mode (0)
or Monitor Mode (1) at the initiating extension (i.e., Barge In initiator).
20-13-15: Class of Service Options (Supplementary Service) - Barge In, Ini-
tiate
In an extension's Class of Service, enable (1) or disable (0) Barge In at
the initiating extension (i.e., Barge In initiator).
20-13-16: Class of Service Options (Supplementary Service) - Barge In,
Receive
In an extension's Class of Service, enable (1) or disable (0) Barge In at
the receiving extension (i.e., Barge In receive).
20-13-17: Class of Service Options (Supplementary Service) - Barge In Tone/
Display
Enable (1) or disable (0) the Barge In Tone. If disabled, this also turns off
the Barge In display at the called extension.
20-13-32: Class of Service Options (Supplementary Service) - Multiple Barge
In
Enable (1) or disable (0) the extension's ability to have multiple user's
Barge In to their conversation.
20-14-11: Class of Service Options for DISA - DISA Trunk Barge In
Use this option to enabled (1) or disable (0) a DISA user from using the
Barge In feature with the service code defined in Program 11-12-08.
20-18-07: Service Tone Timer - Intrusion Tone Repeat Time
After a user Barges In, the system repeats the Barge In tone after this
interval. Normally, you should disable this timer by entering 0. (This timer
also affect any other types of call interruption features, such as Voice
Mail Conversation Recording.
21-01-03: System Options for Outgoing Calls - Trunk Interdigit Time (Exter-
nal)
Program how long an extension must wait before using the Barge In fea-
ture can be used on a call (this timer waits until this timer expires before
putting a call in a talk state).
XEN Topaz
Features