NEC Xen Topaz Features And Specifications Manual page 151

XEN Topaz
This feature works for DID trunks with a trunk service type 1 in Program 22-02. Other
types of trunks may use the DID table, but the new DID intercept feature is not yet
supported.
With the DID Intercept for each DID number feature, when the primary destination
(Program 22-11-05) is set to Voice Mail, the Voice Mail protocol is:
1. Busy Intercept = Forward Busy
2. Ring-No-Answer Intercept = Forward RNA
When the secondary destination (Program 22-11-06) is set to Voice Mail, the Voice
Mail protocol is based on the first destination's routing. When the incoming call is
forwarded to the first destination by a busy intercept, the Voice Mail protocol will be that
it forwards busy calls. When the incoming call is routed to the first destination by a ring-
no-answer intercept, the protocol will be that it forwards ring-no-answer. The Voice Mail
will transfer the calls to the mailbox number defined in Program 22-11-02.
Conditions
Default Setting
Disabled.
• Programming
Features and Specifications Manual
Note: Any valid DID number must be entered in the DID table (Program 22-11). If
a valid DID number is not entered, there will be no ring destination for any
incoming calls to that number (the calls will not ring any extension in the
system).
A. DID service must be purchased from you local telephone company
B. DID Intercept for each DID number works for DID trunks with a trunk service type
1 in Program 22-02. Other types of trunks may use the DID table, the DID inter-
cept feature is not supported
C. BRI DID requires a BRI PCB and Option Box.
14-05-01 : Trunk Groups
Put DID trunks in the same trunk group (other than group 1).
15-07-01 : Programming Function Keys
You can assign line keys for DID trunks (01-50). Without line keys, DID
calls ring line appearance (CALL) keys.
20-09-01 : Class of Service Options (Incoming Call Service) - Second Call for
DID/ DISA/ DIL
Enable (1) or disable (0) an extension's ability to receive a second call
from a DID, DISA or DIL, caller.
22-01-06 : System Options for Incoming Calls - DID Ring-No-Answer Time
Set the DID Ring-No-Answer (RNA) Intercept interval (0-64800 sec-
onds). In systems with RNA Intercept, the DID call rings the destination
extension for this interval and then rings Intercept Ring Group. This also
sets how long the system should let an unanswered DID ring before
transferring the call to the DID Intercept's first destination.
NEC Business Solutions Ltd
Chapter 4 - 143