NEC Xen Topaz Features And Specifications Manual page 60

NEC Business Solutions Ltd
1. Dial *.
2. Dial your Account Code (1-16 digits, using 0-9 and #).
3. Dial *.
To enter an Account Code before dialling the outside number:
1. Access trunk for outside call.
2. Dial *.
3. 3. Dial your Account Code (1-16 digits, using 0-9 and #).
4. Dial *.
5. Dial the number you want to call.
To dial an outside number and let your system tell you when an Account Code is
required:
1. Access a trunk and dial the number you want to call.
2. Wait for your call to go through.
To enter an Account Code for an incoming call:
1. Answer incoming call.
Chapter 4 - 52
OR
Press your Account Code key (PGM 15-07 or SC 851: code 50).
If Account Codes are hidden, each digit you dial will show an " * " character on the telephone's display.
OR
Press your Account Code key (PGM 15-07 or SC 851: code 50).
If your system has Forced Account Codes, you must use this procedure. If it has Verified Account Codes,
you can use this procedure instead of letting the system prompt you for your Account Code. You may also
use this procedure if your system has Optional Account Codes. If your system has Verified Account Codes
enabled, be sure to choose a code programmed into your Verified Account Code list.
You can access a trunk by pressing a line key or Dialling a code (except 0). Refer to Central Office Calls,
Placing for more information.
OR
Press your Account Code key (PGM 15-07 or SC 851: code 50)
If you make an incorrect entry, your system may automatically alert the operator. If Account Codes are hid-
den, each digit you dial will show an " * " character on the telephone's display.
OR
Press your Account Code key (PGM 15-07 or SC 851: code 50)
If you hear "stutter dial tone after Dialling the number, ARS is requesting that you enter an ARS Authoriza-
tion Code. Refer to Automatic Route Selection for more information.
If you hear "stutter dial tone after Dialling the number, ARS is requesting that you enter an ARS Authoriza-
tion Code. Refer to Automatic Route Selection for more information.
OR
If you hear "Please enter an Account Code," and your display shows ENTER ACCOUNT:
Dial *.
OR
Press your Account Code key (PGM 15-07 or SC 851: code 50)
Dial your Account Code (1-16 digits, using 0-9 and #).
If Account Codes are hidden, each digit you dial will show an " * " character on the tele-
phone's display.
Dial *.
OR
Press your Account Code key (PGM 15-07 or SC 851: code 50)
This procedure is not available at SLTs.
If Account Codes for Incoming Calls is disabled, the following steps will dial digits out onto the connected
trunk.
XEN Topaz
Features