NEC Xen Topaz Features And Specifications Manual page 169

XEN Topaz
• Operation
Calling an extension from your DSS Console:
1. Press DSS Console key.
Placing a trunk call from your 24-Button DSS Console:
1. Press DSS Console key assigned to trunk.
2. Dial outside number.
Answering a trunk call from your DSS Console:
1. Press flashing DSS Console key assigned to trunk.
Calling a Doorphone from your 64-button DSS Console:
1. Press DOOR1 or DOOR2.
2. Press DSS Console key for Doorphone you want to call (1-6).
Transferring a call using your DSS Console:
1. Place or answer call.
2. Press DSS key for extension that will receive transfer.
3. (Optional) Announce call.
4. Press SPK to hang up.
Making a External Page using your 64-button DSS Console:
1. Press DSS Console External Page zone key (EZ1, EZ2 or EAZ).
Making an Internal Page using your 64-button DSS Console:
1. Press DSS Console Internal Page zone key (IZ1 – IZ4).
Switching the Night Service mode from your 64-button DSS Console:
1. Press Night Service (NT) key.
Features and Specifications Manual
Optional for 64-Button Consoles.
If the call voice-announces, you can make it ring by Dialling 1.
If you don't have Handsfree, you must lift handset to speak.
If you don't have Handsfree, you must lift the handset to speak.
If you don't have Handsfree, you must lift the handset to speak.
If you don't have Handsfree, you must lift the handset to talk to the Doorphone.
If you are on an Intercom call, press HOLD before going to the next step.
You cannot Transfer to an extension that is busy or in Do Not Disturb.
If called party doesn't want the call, press flashing line or CALL key to retrieve it.
If the zone you want is busy, try again later.
If you don't have Handsfree, lift the handset to make your announcement.
If the zone you want is busy, try again later.
If you don't have Handsfree, lift the handset to make your announcement.
NEC Business Solutions Ltd
Chapter 4 - 161