NEC Xen Topaz Features And Specifications Manual page 265

XEN Topaz
• Related Features
• Operation
To Park a call in a system orbit:
To pick up a parked call:
To park a call at your extension:
Features and Specifications Manual
Set the Extended Park Hold Time (0-64800 seconds). A call left parked
longer than this interval will recall the extension that initially parked it.
24-03-01: Park Group
Assign an extension to a Park Group (01-64). An extension can only
pick up a call Parked by a member of its own Park Group.
• Hold
A user can place a call in a temporary waiting state without putting it in orbit.
• Programmable Function Keys
Function keys simplify Park operation.
You can Park Intercom or trunk calls.
1. Press Park key (PGM 15-07 or SC 852: *04 + orbit).
The Park key LED lights.
If you hear busy tone, the orbit is busy. Try another orbit.
2. Use Paging to announce call.
3. Press SPK to hang up.
If not picked up, the call will recall to you.
OR
1. At system phone, press HOLD.
OR
At a single line telephone, hookflash.
OR
2. Dial 831 and the Park orbit (01-64).
If you hear busy tone, the orbit is busy. Try another orbit.
3. Use Paging to announce call.
4. Press SPK to hang up.
If not picked up, the call will recall to you.
Note: The parked call recalls after the Park Hold Time (Program 24-01-06). The call rings the extension to
which it recalled for the Hold Recall Callback Time (Program 24- 01-02). The call then goes on Hold for the
Park Hold Time - then recalls again for the Hold Recall Callback Time. The call continues to cycle between
Hold and recall until the extension user answers the call or the outside party hangs up. This applies to
extended calls only.
1. Lift handset.
2. Press Park key (PGM 15-07 or SC 852: *04 + orbit).
OR
1. At system phone, press a SPK key.
OR
At single line telephone, lift handset.
2. Dial 861 and the Park orbit (1-64).
1. Do not hang up.
2. Press HOLD and dial 773.
NEC Business Solutions Ltd
Chapter 4 - 257