Direct Station Selection (Dss) Console - NEC Xen Topaz Features And Specifications Manual

XEN Topaz

Direct Station Selection (DSS) Console

• Description
The DSS Consoles (64-Button, 24-Button) gives a system phone user a Busy Lamp
Field (BLF) and one-button access to extensions, trunks and system features. This
saves time for users that do a lot of call processing (e.g., operators or dispatchers).
The DSS Console simplifies:
The 64 button DSS Console also provides DSS Console Alternate Answer. This lets a
system phone user with a DSS Console quickly reroute their calls to a co-worker.
You can also program the DSS Console keys to store Function codes. This provides
the DSS Console user with many of the features available on Programmable Feature
Keys.
The maximum number of DSS Consoles allowed is 9. There is no limit on the number
of 64-button DSS consoles per extension, but an extension can have only one 24-
button DLS console. An extension can, however, have both a 24-button DSS and 64-
button DLS console(s) installed.
Installation of the Consoles
The 64-button console plugs into the eight port of the 308M/308E/008E unit and is
assigned to a system phone in Program 30-02. The keys are set in Program 30-03,
each key has a function number and optional additional data.
The 24-button console plugs into any display-type system phone via the socket in the
base of the phone, it does not take a port on the system. The keys are set either via
Program 15-07 or by service codes 851/852 from the system phone it is plugged into.
Each key has a function number and optional additional data.
Conditions
Features and Specifications Manual
•
Calling extensions and Doorphones
•
Placing, answering and transferring outside calls
•
Making an External or Internal Page
•
Switching the Night Service mode
•
Activating DSS Console Alternate Answer
A. Changing flash patterns for DSS Consoles will also change them for Hotline keys.
B. When installing a DSS, the system must auto-detect the console in order for the
LEDS to function correctly. When connecting the DSS to a extension previously
defined with another circuit type, undefine the circuit type (enter 00 in Program
10-03 for the extension number), then connect the DSS Console.
C. To program the keys on a 24-Button DLS in Program 15-07, use the extension
number to which the DLS is installed and, regardless of the type of system phone
connected, start programming the DLS keys at key number 23.
NEC Business Solutions Ltd
Chapter 4 - 159